Electric Heat Treatment Gas Furnace 450ordm C Rapid Annealing For Electronic Components

Electric Furnace 450°C HRF180-05 Type Rapid Annealing Furnace with Effective Chamber Dimensions 600*500*600mm W*D*H

The HRF180-05 Type Rapid Annealing Furnace is primarily designed for processes such as drying, curing, or debinding of semiconductors, electronic components, or materials.

• Rated Temperature: 400°C
• Maximum Temperature: 450°C
• Furnace Chamber Size: 600 × 500 × 600mm (W × D × H)
• Loading Device: Drawer-style tray
• Furnace Chamber Material: SUS304
• Heating Element: Custom-made squirrel-cage heater
• Temperature Stability: ±1°C
• Temperature Uniformity: ±3°C (at 400°C platform, tested with an empty furnace for 1 hour)
• Detection Thermocouple: K-type thermocouple
• Exhaust Chimney: 1, DN50, with manual adjustment of exhaust port size
• Temperature Controller: FP93 temperature controller
• Number of Temperature Control Segments: 4 × 10 segments
• Number of Temperature Control Points: 1 point
• Number of Detection Points: 1 point
• Alarm Protection: Audible and visual alarms for over-temperature, open circuit, low pressure, and low water pressure
• Over-temperature Protection: Independent temperature-sensing over-temperature protector
• Motor Protection: Over-current protection for the motor
• Surface Temperature Rise: ≤35°C
• Heating Rate: ≤5°C/min
• Heating Power: 12 kW
• Insulation Power: ≤6 kW
• Reference External Dimensions: 1110mm × 1050mm × 1820mm (W × D × H, subject to actual product)
• Equipment Color: Light grey

• Environmental Conditions: Temperature 0 to 40°C, humidity ≤80% RH, no corrosive gases, no strong air disturbance
• Ventilation System: Non-contact connection to the user's extraction system, with an extraction capacity greater than 5 m³/h
• Floor Requirements: Level, no significant vibration, load-bearing capacity >200 Kg/m²
• Power Requirements: Capacity greater than 16 kVA, 3-phase 5-wire, voltage 220/380V, frequency 50Hz. Live wires: Yellow, Green, Red; Neutral wire: Blue; Earth wire: Green/Yellow
• Installation Site: 2000mm × 1800mm × 3000mm (W × D × H), installation area should be greater than 4m²